The main function of the airfoil bearing turbo blower is aeration, so it is necessary to connect the pipe. Some customers leave the outlet pipe when using the airfoil bearing turbo blower with the outlet size of the blower, which will lead to the use of the airfoil bearing turbo blower affected. Therefore, today, I will explain to you how to install the outlet pipe of the airfoil bearing turbo blower.

(1)The size of the pipe needs to be as big as the size of the outlet of the airfoil bearing turbo blower or larger than the size of the pipe. If the pipe needs to be changed, it needs to be changed slowly. It is recommended to use the taper pipe, and the long elbow is recommended to bend the pipe, so that the gas flow can be smoother.

(2) In order to reduce the impact on the airfoil bearing turbo blower, we need to reduce the heat expansion and cold contraction of the pipeline. In order to better install and disassemble, soft joints can be used at the outlet.

(3) When the airfoil bearing turbo blower is used in parallel with other blowers, check valves need to be installed. When the blower is used in parallel, pipes need to be enlarged according to the air volume.

(4) If the blower is not used for a long time, then it is necessary to block the external pressure on the blower.

(5) Support is installed for the airfoil bearing turbo blower, so as to prevent the pipe and outer chain too heavy, resulting in load on the blower.

(6) If the elastic joint and long elbow of the blower make noise, then the pipe must be covered with sound insulation material.

If you have any problems about turbo blower, you can also leave your message, we will answer you as soon as possible.